B2400-0001 Heater, LowFlow, D-1 Crystal Pure Repl, 230v, 4.0kW, GenericDimension OneStainless steel horizontal low flow heater assembly with 1-1/2" unions, rated at 4.0kW/230v. Replaces Dimension One Crystal Pure assemblies made in 1993-1994...

E2400-0003 Heater, LowFlow, D-1 SLC-V Repl, 230v, 4.0kW, GenericDimension OneStainless steel vertical low flow replacement heater assembly rated at 4.0kW/230v. 3/4" barb x 3/4" 90&deg barb assembly. Replaces Dimension One SLC-V vertical heaters made...

C3556-1 Heater,LowFlow Tromb,D-1 FastFlo Repl,230v,6.0kW,w/Adpt,Gen Replacement for D-1 Fast Flo heater system. OEM system had Laing pump attached directly to this heater. Replacement Laing circ pump is not included. RECOMMENDED PARTS: 55-270-1513...

This product has bee discontinued by the manufacturer.  The recommended replacement is:      There will be a small modification to make the new heater work.  You will need to extend the tubing going from the original the new...

C3238-1A Htr,LowFlow Sq. Back,Aber 06 Heater 3220 Repl,230v,5.5kW, Aber-PacificStainless steel, 5.5kw/230v low flow square back replacement heater. It measures 20" x 16" x 14" w/32" pigtail cord. Replaces Aber # 06HTR3220. RECOMMENDED PARTS: 55-270-1513...

C3550-1 Heater, LowFlow Square Back, D-1 Repl, 230v, 5.5kW, Generic Dimension One SpasStainless steel, 5.5kw/230V low flow square back replacement heater. Dual element with 4 wires, wraps around Gecko M class control box, with TCO, & plate. RECOMMENDED...

C2400-C3330-1A Heater, LowFlow, Caldera Highland Repl, 230v, 4.0kW, Generic Caldera/WatkinsStainless steel, 4.0kW/230v low flow replacement heater. The heater has a pressure switch tap at 0&deg fromt the terminals and short leads on the heater...

C3226-1A Heater, Low Flow Trombone,Sndnc Repl,26"x6", 230v, 4.0kW,Gen This heater includes a pressure switch tap. Used in all 2002+ J-310/J-315 and 2004 J-325 Jacuzzi Hot Tub Models. RECOMMENDED PARTS: 55-270-1506 Air/Water Tubing, Vinyl, 3/4"id x...

26-08120 Heater, LowFlow, 3" x 6.469", 230v, 5.5kW, w/cord, Generic Dynasty Spas 5.5kW/230v 3" x 12" vertical low flow replacement heater with enclosure, pressure switch, 1"barb x 1"barb inlet/outlet. RECOMMENDED PARTS: 47-319-1005 Pressure Switch 3029,...

20-08443 Heater, FloThru, 15" x 2", 230v, 5.5kW, w/Box, PS, Generic Flo Thru HeaterStainless steel, 5.5kW/1.375kW, 230v/115v convertible replacement heater with box to hold the thermostat, hi limit and heater on indicator light. 2" heater split nuts,...

20-08575 Heater, FloThru,Dakota Repl,15" x 2",230v, 5.5kW,w/J-Box,Gen Dakota SpasStainless steel replacement flow thru heater assembly with 48" amp cord, and a 5.5kW/230v element. This is an aftermarket heater made by Therm Products for use on Dakota...

A1150-2350-B Heater, FloThru, 7-Seas, 1.5kW, 115v, 1-1/2" x 13", Tee, Gen RECOMMENDED PARTS:

B24055Y Heater, FloThru, CorrectTech/Ingenious, 11" x 2",230v,5.5kW Correct Tech/IngeniousStainless steel, 2" x 11", 5.5kW/230v replacement heater assembly. This heater has 2 mounting studs, and a pressure switch tap at 0 degrees from the heater...

B24040GM Heater, FloThru, Gecko M-Class, 15" x 2", 230v, 4.0kW Gecko M-ClassStainless steel 2" x 15" 4.0kW/230v, replacement flow thru heater with 2"mbt split nuts. 2" tailpieces, and gaskets not included. Pressure switch not included RECOMMENDED PARTS:...

B24055UC Heater, FloThru, Gecko S-Class, 15" x 2", 230v, 5.5kW,Coated Gecko S-ClassStainless steel 2-1/4" x 15" 5.5kW/230v replacement flow thru heater with 2"mbt split nuts. 2" heater tailpieces, and gaskets not included included. Pressure switch not...

B24055Q Heater, FloThru, Sundance/Spa Bldrs, 15" x 2", 230v, 5.5kW Flow Thru Heater Assembly used in Sundance Spas, Spa Builders and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/230v, 1/8"npt pressure switch tap, (2) 10-32 x 3/8"...

B24055B Heater, FloThru, Acura/ACC 15" x 2", 230v, 5.5kW, w/o TlPc GECKO / MAAX / SONOMA / SAVANNAH / BRETT EM100 & EM190 / ACURA / ACC / ACTION / SPLASH / PDC / HYDRO QUIPStainless steel replacement heater assembly 2" x 15" rated at 5.5kW/230v. Top...

B24040N Heater, FloThru, BWG, 15" x 2", 230v, 4.0kW, w/o PS Balboa Water GroupStainless steel replacement heater assembly for use with the Balboa Lite Leader control system. 2" x 15" manifold with 1/8"npt pressure switch tap at 90 degrees from the...

B24055C1 Heater, FloThru, NuWave, 15" x 2", 230v, 5.5kW, w/o TlPc, PS NuWave, West CoastStainless steel, 15" 2" 5.5kW/230v replacement flow thru heater. Pressure switch tap at 0 degrees from the heater terminals. The assembly has a sensor cover plate, ...

B24055LA5 Heater, FloThru,Gecko S-Class,15" x 2",230v,5.5kW,w/o TlPc This heater is used on Gecko S-Class Systems, and ships without a pressure switch, terminal to heater wires, grounding bar, or tail pieces. RECOMMENDED PARTS: 26-395-1002 Gate Valve,...