Pump,Aqua Flo XP2e,2.0hp,230v,2-Spd,56fr,2",OEM (1)

Pump,Aqua Flo XP2e,2.0hp,230v,2-Spd,56fr,2",OEM, 05320761-2040

SKU:
34-402-5250
Availability:
Usually Ships Same Day/Next Day
$499.00
Write a Review
Description

05320761-2040 Pump,Aqua Flo XP2e,2.0hp,230v,2-Spd,56fr,2",OEM Aqua-Flo by Gecko's Flo-Master® XP2e pump is the energy conscious offering within its high performance spa pump line. It's designed for today's large, heavily jetted spas requiring increased flow. The XP2e pump fits within the same envelope as the original XP2 pump, yet provides greater flow while improving the overall energy efficiency of the spa.

Spa Pump Features:

  • Fine tuned impeller that moves water through the system with maximum performance
  • 2" intake and discharge
  • 56-frame motor for added strength
  • Thermally protected to extend life expectancy of motor
  • Continuous duty horsepower of 1.5hp, 2.0hp, 3.0hp, 4.0hp, and 5.0hp. Single or dual speed (SEE THE AVAILABLE STYLES TAB)

 

In 2012, the manufacturer changed the way Aquaflo pumps are rated. These pumps are now assigned both an operational horsepower (ohp), and a total horsepower (thp) rating. Previous versions of these pumps used only the operational horsepower. If you are replacing an older Aquaflo pump, be sure to match the operational hp rating rather than the total hp.
Gecko uses both Emerson & Century motors which have subtly different ratings. The listed amperage and motor manufacturer of the pump you receive MAY differ from the one you are trying to replace. To find the correct replacement pump, match the amperage as closely as possible (not necessarily identical) and then check the horsepower – See note above.

RECOMMENDED PARTS:

60-320-1060 Pump Cord, H-Q, 14/4 x 31, AMP-4 Male(R/B/W with G)

60-355-1028 Cord, H-Q, P1, 2 Speed, Molded/Lit, 48", 115v/230v, 15A, Red

60-555-3000 Bonding Wire, Generic, 36"

88-375-1050 Lube Tube, Roper Products, 4oz, with PFTE

88-375-1050 Lube Tube, Roper Products, 4oz, with PFTE

89-270-1166 Pump Union, 2" Female Buttress Thread x 2" Slip

90-423-5230 O-Ring, Buna-N, 2-1/2" ID, 1/8" Cross Section, Generic

99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads

Warranty
1 Year