48-0007A Heater, VersiHeat, HQ, 13" x 2", 9-Pin Retro-Fit Kit HydroQuip 13" x 2" Versiheat assembly with 60" cord and pressure switch.
The black box conceals the power wires and pressure switch. This heater is used to replace an existing HydroQuip Versiheater with a 9 pin cord. The 9 pin cord style has been discontinued. This heater will serve as a direct replacement. The power and pressure switch connections will by-pass the old 9 pin wire harness and connect directly to the circuit board.
RECOMMENDED PARTS:
26-395-1002 Gate Valve, UniBody, Magic, 2" Slip x 2" Slip, 80psi
89-395-1110 Inside Pipe Extender, 2" Spigot, Magic Mend
99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads
99-361-1145 Tool, Pool Tool, Wire Saw, PVC
99-361-1145 Tool, Pool Tool, Wire Saw, PVC
