SundanceĀ® Spas
Circuit Board, Sundance / Jacuzzi, LX-10, Rev 5.03+, (2002 +), w/3 Big Relays, 1-Pump, No Circ Pump
- SKU:
- 6600-722
- MPN:
- 6600-722
Description
Sundance/Jacuzzi 6600-722
Built with you in mind
This Circuit Board is manufactured by Sundance/Jacuzzi.
- LX-10, Rev 5.03+, 1-Pump, No Circ
- 6600-722 Circuit Board, Sundance / Jacuzzi, LX-10, Rev 5.03+, (2002 +), w/3 Big Relays, 1-Pump, No Circ Pump
- 6600-722. Was: 6600-089, 6600-289, 3-60-0098
Additional Information
Spa Brands | Sundance/Jacuzzi |
Alternate Part Numbers
- 6600-042
- 6600-089
- 6600-289
- SD6600-722
-
Used on these Sundance® Spas Models without a Circulation Pump:
- 2017+ 680 1-pump Prado and Prado 5
- 2006+ 680 1-Pump: Denali® and Tacoma®
- 2003-2005 Del Sol Redondo and Hermosa
- 2000-2002 Sweetwater Board: Aruba, Bali, and Cyprus
- 2000-2001 Sweetwater Board:
- 2000-2001 Aruba, Bali, and Cyprus and
- 6600-082,
- 6600-089 Circuit Board.
- LX-10 Series 3-60-0098
- 6600-289, 6600-042 with eprom logic chip 5.+ Jacuzzi® Spas Circuit Board for:
- J-210
- J-220 Confirms UV counter settings.
- The Circuit Board must have the jumpers configured on the board to the settings on your spa, also the programming for your spa needs to be done.
- Jumper 1-2: With Jumper on: 15Amp (if system is 120 Volt only). 30Amp (if system is a 4 wire 120/240 Volt system) 40Amp (if system is a 4 wire 120/240 Volt system)
- Jumper 3-4: With Jumper on: 2 jet pumps (do not confuse the small Circ pump as 1 pump). Without Jumper: 1 Jet pump
- Jumper 7-8: With Jumper on: Centigrade. With Jumper off : Fahrenheit Readout on panel.