ECM27SQU Motor, Century,0.75-2.7hp,230v,Var-Spd,48fr,SQFL,V-Green
- Integrated Timer Interface
- On- and Off-Board Mountable
- Interface
- Timer Mode
- Manual Mode
- Freeze Protection
- Auxiliary Load Capacity
- Configurable Prime Settings
- Noise Reduction Design
- Adjustable Contrast
- Power Factor Correction
|
- Factory Reset
- Battery Backup - Program Saver
- LCD Display with Backlight
- Ball Bearing
- TEFC
- Rotation: CCWPE
- Single Phase
- 303 Stainless Steel Shaft
- Class F Insulation
- 50°C Ambient
- UV and Rain-Proof Enclosure
|
|
35-126-1270 |
THP |
3/4 ~ 2.7 |
RPM |
3450/600 |
Volts |
230 |
Service Factor |
1.0 |
Full Amps |
10.5/0.5 |
Load Number |
ECM27SQU |
Stock Flange |
Square |
Percent Energy Savings* |
80% |
Yearly $ Savings** |
$1,318.05 |
|
*Savings over the equivalent single-speed motor.
**Calculated @ $.23 per Kilowatt hour, pumping same amount of water as a single-speed motor, eight hours per day.
The reasons a V-Green® premium-efficiency replacement motor can offer such impressive savings are numerous including:
- An integrated timer interface allows for easier installation and operation of a variable speed motor. The all-in-one design
reduces installation time and expense with no additional wiring required.
|
|
- The amount of horsepower required to move the water through the pipes drops much more quickly than the speed. While it
may take one horsepower to move the water through the pipes on high speed, it only takes 1/8 horsepower to move one half as much water through those same pipes on low speed. Even when run on low speed twice as long to pump the same amount of water as on high speed, the lower horsepower results in significant energy savings.
|
RECOMMENDED PARTS:
60-555-1750 Flanged Fork Terminal, 16-14 AWG, #8 Stud, Blue, Quantity 25
60-555-1766 Disconnect, Female, 16-14AWG, .250 Tab, Blue, Quantity 25
60-555-1780 Disconnect, 90° Female, 22-18AWG,.250 Tab, Bare, qty 25
99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads
99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads
99-361-1095 Tool, Pool Tool, Impeller Wrench, Closed
99-361-1115 Tool, Pool Tool, Obstruction Wrench Kit
99-363-1200 Tool, Multimeter, Digital with Leads
99-366-1075 Tool, Seal Setting