Motor, Century, 0.75-2.7hp, 230v, Var-Spd, 48fr, C-Face Thd, V-Grn

SKU:
35-126-1272
Availability:
USUALLY SHIPPED WITHIN 5 BUSINESS DAYS.
$1,141.00
Write a Review
ECM27CU Motor, Century,0.75-2.7hp,230v,Var-Spd,48fr,C-Face Thd,V-Grn
  • Integrated Timer Interface
  • On- and Off-Board Mountable
  • Interface
  • Timer Mode
  • Manual Mode
  • Freeze Protection
  • Auxiliary Load Capacity
  • Configurable Prime Settings
  • Noise Reduction Design
  • Adjustable Contrast
  • Power Factor Correction
  • Factory Reset
  • Battery Backup - Program Saver
  • LCD Display with Backlight
  • Ball Bearing
  • TEFC
  • Rotation: CCWPE
  • Single Phase
  • 303 Stainless Steel Shaft
  • Class F Insulation
  • 50°C Ambient
  • UV and Rain-Proof Enclosure

  35-126-1272
THP
3/4 ~ 2.7
RPM
3450/600
Volts
230
Service Factor
1.0
Full Amps
10.5/0.5
Load Number
ECM27CU
Stock Flange
C-Face
Percent Energy Savings*
80%
Yearly $ Savings**
$1,318.05

*Savings over the equivalent single-speed motor.
**Calculated @ $.23 per Kilowatt hour, pumping same amount of water as a single-speed motor, eight hours per day.

The reasons a V-Green® premium-efficiency replacement motor can offer such impressive savings
are numerous including:

  • An integrated timer interface allows for easier installation and operation of a variable speed motor. The all-in-one design
    reduces installation time and expense with no additional wiring required.
  • The amount of horsepower required to move the water through the pipes drops much more quickly than the speed. While it
    may take one horsepower to move the water through the pipes on high speed, it only takes 1/8 horsepower to move one half
    as much water through those same pipes on low speed. Even when run on low speed twice as long to pump the same amount
    of water as on high speed, the lower horsepower results in significant energy savings.

RECOMMENDED PARTS:

60-555-1750 Flanged Fork Terminal, 16-14 AWG, #8 Stud, Blue, Quantity 25

60-555-1766 Disconnect, Female, 16-14AWG, .250 Tab, Blue, Quantity 25

60-555-1780 Disconnect, 90° Female, 22-18AWG,.250 Tab, Bare, qty 25

99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads

99-242-1100 Tool, Clamp-On Multimeter, Tenma, with Sensor and Leads

99-361-1095 Tool, Pool Tool, Impeller Wrench, Closed

99-361-1115 Tool, Pool Tool, Obstruction Wrench Kit

99-363-1200 Tool, Multimeter, Digital with Leads

99-366-1075 Tool, Seal Setting

0